Due to occasional porosity at the center of our product, miter corners whenever possible and avoid ripping. For cutting larger volumes of our product on the job site (50+ cuts), we recommend a gas powered cut-off saw with a masonry cut-off wheel. Cut-off saws are available at most rental centers.
Our product is more abrasive and difficult to cut than wood and as a result, we recommend the use of a low-cost or used blade. For smaller projects, use a 16 or fewer tooth carbide-tipped blade on a standard circular or miter saw.
When working with XPotential Products, always wear gloves, steel toed safety boots and eye protection.
