Engineering Specifications & Comparisons to Spruce / Pine

For a printable version of the XPotential Products Engineering Specifications please click the link below
. You must have Acrobat Reader on your computer to view the printable version.

Printable version of the XPotential Products Engineering Specifications
If you do not have Acrobat Reader you can download FREE update at this location. www.adobe.com
ENGINEERING SPECIFICATIONS
PROPERTY
IMPACT-POSTTM
Tested value
SPRUCE/PINE
Published Data
Specific Gravity (D792)
1.15 — 1.28
0.42 — 0.70
Taber Abrasion
@ 1000 cycles
1.02 mm (0.04") 5
Destroyed
Hardness Shore D
54 — 59 5
N/A
Thermal Expansion (E228)
78 uM/M/C 1

26 uM/M/C

Softening Temp.
237-255 F 1
N/A
Flame Spread (D3806)
Red Oak = 100%
55% 5
23 — 100+%
Leachate TCLP
EPA 1311
Pass 4
N/A
Fungus & Termites
Not Attacked
N/A
Water Absorption
(D1037)
0.5 — 1.3% 1
>30%
Paint Type — Recommended
Exterior "solvent / latex" paint (or)
solid non-penetrating stain
Any
Acute Oral
Toxicity Limit
Non Toxic 3
Treated lumber
can be toxic
Insulating Value
Asbestos = 52
7 5
41
UV Resistance
UV A chamber@38C
10,000 hrs slight fading,
no loss to structural integrity 2
Degrades slowly
Bleached/darkened @1000 Hours


Notes on Engineering Specifications:

Subscript numbers denote the lab that performed the tests:

1. Saskatchewan Research Council
2. XPotential Labs
3. Product Safety Labs, E. Brunswick, NJ
4. Toronto Testing Laboratories
5. Alberta Research Council

Comparisons To Spruce / Pine
NOTE :Due to our flexural strength, XPotential Products have limited structural applications
Compressive Strength
Comparable to Spruce/Pine
Flexural Strength
Approximately 1/2 that of Spruce/Pine
Tensile Strength
Comparable to Spruce/Pine
Shear Strength
Comparable to Spruce/Pine
Fastener Retention
At Least Twice that of Spruce/Pine
BACK TO TOP
E-mail this link to a friend.
Enter recipients e-mail: