Frequently Asked Questions:
Who typically uses XPotential Products?
The uses for XPotential Products are virtually endless and limited only by an individual’s imagination. Many people have recognized the inherent value: homeowners; farmers; ranchers; Landscape Architects; contractors; golf courses; school boards; parking lot and property management companies; civic, state/provincial and federal governments; and many others in the industrial, institutional and commercial sectors.
BACK TO TOP
Can Impact-PostsTM be substituted for wood in all applications?
Our products have characteristics that make them more suitable in many applications. They perform favorably under static uniform loading when compressive strength over the entire length is required. 6 x 6 Impact-PostsTM are ideal for landscaping, marine and fencing projects. 4 x 4 Impact-PostsTM are ideal for landscaping, small retaining walls, terracing, planters and edging. Suitable for select fence post applications, please consult the manufacturer toll free @ 1-800-863-6619 for recommendations.
The flexural strength of XPotential Products is less than that of wood and they should not be substituted for wood products without regard to engineering considerations and testing for the intended application. Engineering specifications are available through XPotential Products Inc. upon request.
BACK TO TOP
What are the advantages of XPotential Products over other alternatives?
• Our plastic composite is manufactured utilizing a plastic binder and non-metallic materials from waste automobiles. They will never rot, twist, cup or splinter.
• XPotential Products are durable throughout and as a result, ends never need to be treated or chamfered. When cutting to length, the exposed center of treated lumber must be coated with preservative and ends that face upward should also be chamfered to ensure that water does not pool and speed the process of decay. This is not the case with XPotential Products.
• Our products do not contain wood. They help to preserve woodland resources and forests for the enjoyment of future generations.
BACK TO TOP
Why are Impact-CurbsTM easier to install than concrete curbs?
Our products can be dropped off a truck deck without cracking or breaking. Unlike concrete, our curbs do not need to be lowered by a hydraulic arm to prevent damage; two people can lift them by hand. This contributes to reduced installation costs.
BACK TO TOP
What is the purpose for different lengths of Impact-CurbsTM?
The standards between Canada and U.S.A. are different. In Canada, an 8’ curb is normally used while in the U.S. a 6’ curb is standard.
BACK TO TOP
Are XPotential Products solid and consistent throughout?
The exterior of the composite is solid and consistent while it is porous in the middle. Our material is heavier than water with an average density of 75 lbs./ft3 (i.e.: specific gravity of 1.2).
BACK TO TOP
Is pre-drilling required for fasteners?
XPotential Products have at least twice the nail and screw retention of wood. Larger fasteners require a pilot hole to prevent binding during placement. As a result of the composite’s density, the use of screws is recommended over nails whenever possible. Smaller nails may require a pilot hole to prevent bending.
BACK TO TOP
Do XPotential Products expand and contract with temperature changes?
As with all materials, our products will expand and contract slightly under significant temperature changes. However, the expansion should not be an issue in most applications. For more information, review our engineering specifications.
BACK TO TOP
How should XPotential Products be stored before use?
It is important to store our product as one would store lumber. Stack flat, one on top of the other, on two posts running crosswise to the pile; approximately 18-24 inches in from the ends.
BACK TO TOP
Will XPotential Products flake off at the surface or become brittle after prolonged exposure to ultra-violet (UV) rays? Are they flammable? Will they melt?
The interiors of automobiles, used as our filler, are typically UV stabilized to prevent fading and/or cracking. Also present are additives designed to increase flame-retardant properties. By utilizing this feedstock in our composite, our products take on similar characteristics. The flame spread is tested at 55% of red oak; making our products considerably more flame-resistant than most wood. The melting point is between 114-1240C/237-2550F.
BACK TO TOP
Do XPotential Products come in sizes and colors not listed in the brochure?
XPotential Products can be manufactured in most sizes from 2 1/2" x 3 1/2" x 8’ up to 12" x 12" x 14’. Custom painting, cutting and drilling are also available. Contact your local distributor or XPotential Products Inc. today for pricing and minimum order.
BACK TO TOP
Can XPotential Products be painted?
Our composite contains a significant amount of fiber and is easily painted. As with any material, ensure that the surface is clean and dry before application. For a consistent surface color, we recommend two coats of good quality exterior oil-based, latex or traffic paint.
It is important to note that there is no need to paint, treat or stain our products other than for appearance. They are inherently resistant to the elements throughout. The earthy brown natural color blends nicely with the outdoors.
BACK TO TOP
|
|
|
